Allied Telesis AT-S41 - Manual (Page 230)

AT-S41 User’s Guide
230
Activating Broadcast Storm Control and Setting a Threshold
To activate broadcast storm control and set a threshold, perform the
following procedure:
1. Click on the Advanced Config menu tab and select Storm Control
from the sub-menu.
The Broadcast Storm Control page will appear, as displayed in
Figure 83.
Figure 83 Broadcast Storm Control Page
2. Select Enable from the Storm Control Status pull-down menu.
3. To set the threshold, select an option from the Threshold value pull-
down menu.
The values available for the threshold level are:
Low (1000 64-byte packets per second)
Medium (2000 64-byte packets per second)
High (5000 64-byte packets per second)
The default threshold level is Low.
4. Click the Apply button located below the pull-down menus to save
your configuration choices.