Spektrum SPM3200 DX3R PRO - Manual (Page 26)

25 SPEKTRUM DX3R PRO USER GUIDE
EN
1. Remove the batteries from the transmitter. This
prevents the possibility of accidentally causing
a short during the conversion.
2. Using the 3/32-inch hex wrench, remove the three
screws on the front of the steering housing as shown.
3. Carefully remove the steering mechanism and
unplug the steering connector. Also remove the
steering shell but leave the backplate.
4. Using the 3/32-inch hex wrench, remove the three
screws on the front of the steering dropdown as
shown.
5. Select the appropriate Left/Right standard steering
spacer and pass the steering wheel mechanism
connector through the hole in the shell.
6. Connect the steering wheel mechanism connector
to the connector from the transmitter being sure the
connection is tight. Note correct polarity.
7. Fit the backplate in place and secure the standard
steering wheel assembly using the three long cap
screws.