Spektrum SPM3200 DX3R PRO - Manual (Page 9)

8 SPEKTRUM DX3R PRO USER GUIDE
EN
lIsT
The List screen displays all the available functions.
To access a function, highlight it with the roller. Then
press the roller to enter the function.
List
Model
Travel
Steer Rate
Exponential
Reverse
Sub Trim
Timer
Bind
Frame Rate
Main
TO aCCEss ThE lIsT sCrEEN
From the main screen, press the roller to access the
List screen.
From any other screen, a back arrow  is located at
the top of each programming screen. Highlight this
arrow with the roller and then press the roller to
return to the List screen.
mOdEl
• From the list screen, highlight the
Model function.
• Press the roller to access the
Model screen.
Model Select:
Allows you to store and select up to 50 model memories.
• In the Model screen use
the roller to highlight
the Select function.
• Press the roller to access.
The box will flash, indicating the
Select function is active.
• Use the roller to select the desired
model memory (models 01 thru
50).
Model Name:
Allows you to give the selected model a name with
up to ten characters.
• In the Model screen use the roller
to highlight the Name function.
• Press the roller to access.
• Use the roller to select the desired
model name character position
by placing the cursor below the
desired position.
• Press the roller to access that
character or number; then use
the roller to change to the desired letter or number.
• Press the roller to move the cursor to the next field.
Model Copy:
Allows you to copy a model memory internally to a
different model memory. For example, you can copy
model 01 to model 50.
• Highlight the Copy To function.
• Press the roller to access. The
box will flash, indicating the Copy
To function has been selected.
• Use the roller to select the model
you choose to copy to (models 01
thru 50).
• Press the roller. The confirmation
screen shown to the left appears.
If the selected model is correct,
use the roller to highlight YES
and press the roller to copy from
the current model to the selected
model.
Note: This will erase the selected
model’s memory.
01: Model 01
Model
Select:
Name:
Model 01 ◊
Copy To:
02: Model 02
Model
Name
Name:
Model 01 ◊
List
Model
Travel
Steer Rate
Exponential
Reverse
Sub Trim
Timer
Bind
Frame Rate
Main
01: Model 01
Model
Select:
Name:
Model 01 ◊
Copy To:
02: Model 02
Confirm
Copy
01: Model 01
to
02: Model 02
NO
YES