Warnings and safety precautions, System installation–royal evo – Spektrum SPMMS3132 User Manual

Page 5

Advertising
background image

Spektrum Air Module

35

EN

Spektrum Air Module

34

EN

Warnings and Safety Precautions

wARning: An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open areas,

following all instructions included with your radio. Keep loose items that can get entangled in the propeller away from the prop, including loose
clothing, or other objects such as pencils and screwdrivers. Especially keep your hands away from the propeller to avoid serious injury.
As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself and others or result in damage
to the product or the property of others.
Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.) that you use.
this model is controlled by a radio signal that is subject to interference from many sources outside your control. this interference can cause momentary
loss of control so it is necessary to always keep a safe distance in all directions around your model, as this margin will help to avoid collisions or injury.

Always operate your model in an open area away from cars, traffic, or people.

Avoid operating your model in the street where injury or damage can occur.

Never operate the model out into the street or populated areas for any reason.

Never operate your model with low transmitter batteries.

Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.) that you use.

Keep all chemicals, small parts and anything electrical out of the reach of children.

Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and protected for this purpose.

1. Remove backplate.

2. Remove existing RF module.

System Installation–Royal EVO

3. Remove legacy antenna.

4. Apply hook and loop to back of main board and Spektrum RF Module.

Advertising