Spektrum SPMMS3132 - Manual (Page 8)

Spektrum Air Module 40 Spektrum Air Module 41
EN EN
6. Connect wire harness noting polarity.
7. Feed antenna wire. Connect to module, taking care not to damage
connector.
8. Ensure all wires are connected properly. White lead towards bottom
of radio. the space between the connector and the transmitter case back
System Installation–MC3030
The Module system is compatible with all Spektrum DSM2 and JR/DSM receivers.
PARKFLYER RECEIVERS
• AR6110 • AR6110E • AR6300 • AR6400 • AR6400L • AR6400LBL
FULL RANGE DSM2 RECEIVERS
• AR600 • AR7000* • AR7600* • AR8000* • AR9000*
FULL RANGE AND POWERSAFE DSM2 RECEIVERS
• AR7100* • AR7100R* • AR9100* • AR9200* • AR12000* • AR12100*
CARBON FUSELAGE DSM2 RECEIVERS
• AR6255* • AR9300*
*An optional Flight Log (SPM9540) RF data recorder is available for these receivers. the Flight Log records
RF link flight data and displays this information onscreen, allowing you to evaluate the RF link performance
of each individual receiver. See Flight Log—Optional for the AR12000 for more details about the optional
Flight Log RF data recorder.
Installing the Receiver
cover is very minimal. Be sure to route the cable flat from the connector
down to the module.
9. Replace back.