Nikon 28-70mm-f-28D-ED-IF-AF-S-Zoom-Nikkor User Manual
Page 16
16
Ch
J
E
G
F
S
IT
Ck
With F60-Series/N60*, F50-Series/N50*, F-601/N6006* cameras:
Usable at a focal length of 70mm when the shooting distance is 1.2m (3.9 ft.) or
greater.
With Pronea 600i/6i* cameras:
Usable at a focal length of 50mm when the shooting distance is 1.2m (3.9 ft.) or
greater. Also usable at 70mm when the shooting distance is 0.7m (2.3 ft.) or greater.
With Pronea S cameras:
Not usable at any focal length.
With D100 cameras:
Usable at a focal length of 28mm when the shooting distance is 2m (6.6 ft.) or
greater. Also usable at 35mm when the shooting distance is 0.7m (2.3 ft.) or greater.
*Sold exclusively in the U.S.A.
Attaching Bayonet Hood HB-19
Line up the white index on the hood with the hood mounting index on the front of the
lens and turn the hood clockwise (as viewed from the front of the lens) until it
click stops. To facilitate attachment or removal of the hood, hold it by its base rather
than its outer edge. Also, make sure the hood is attached straight on the lens to
prevent vignetting. To store the lens hood, you can attach it in the reverse position.
Lens Care
•Clean the lens surface with a blower brush. To remove dirt and smudges, use a
soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from center to outer edge, taking care not to
leave traces or touch other parts.
•Never use thinner or benzene to clean the lens as this might damage the lens, result
in a fire, or cause health problems.
•To protect the front lens element, an NC filter is recommended at all times. A lens
hood also helps protect the front of the lens.
•When storing the lens in the lens case, attach both front and rear caps.
•When the lens will not be used for a long time, store it in a cool, dry place to
prevent mold. Also store the lens away from direct sunlight or chemicals such as
camphor or naphthalene.
•Do not get water on the lens or drop it in water as this will cause it to rust and
malfunction.
•Reinforced plastic is used for some parts of the lens. To avoid damage, never leave
the lens in an excessively hot place.