PerTronix JBA Exhaust 1815S - Manual (Page 4)

LIMITED ONE YEAR WARRANTY
All JBA HEADERS and exhaust products are guaranteed, to the original purchas-
er, to be free of defects in materials and workmanship for one year. This warranty
covers the replacement or repair of the product only and does not cover the cost
of removal and installation, customer applied aftermarket coatings or any discolor-
ation or corrosion of finished surfaces.
Damage or product failure resulting from collision, improper installation, off-road
use, road hazards, the use of exhaust insulating wrap or like products or rust oc-
curring after installation, is not covered by the warranty. The warranty extends only
to the original purchaser.
Should a part become defective it should be returned to the original selling retailer
and must be accompanied with the sales receipt. If there is no retailer in your area,
call the factory for a return authorization and return your part prepaid to the factory
for inspection. PerTronix reserves the rights to replace or repair the alleged defec-
tive part and return the part freight collect.
Parts List:
(1) 3/8x 1 Header Bolts (2) 1 1/8 Spacers for 3/8 Bolt
(1) 3/8 x 1 1/2” Bolt (1) Extender bracket (see fig.1.1)
(1) 3/8x 2 Bolt (1) Modified Factory Brace
(1) 3/8 x2 1/2 Bolt (4) zip ties
(14) 3/8 SAE Lock Washers (1) 3/8 ”45º Temp. Sensor adapter
(1) 3/8 SAE Flat Washer (1) Fuel Line Retaining bracket
(1) 3/8 Nut (1) 1/4-20 X 1-1/2 ”bolt
(6) 5/16 x 2 Bolts (1) 1/4-20 nut
(12) 5/16 SAE Flat Washers (1) 1/4” Flat washer
(6) 5/16 Lock Nuts (1) 1/4” Lock washer