Important check list, Start the engine, Parts list – PerTronix Dougs Headers D6671 User Manual
Page 3
Part No. 0110-003059
Page 3
rev.1 8-23-2011 DSL
IMPORTANT CHECK LIST
Be sure that all brake lines and fuel lines are clear of headers and/or connector pipes.
All spark plug wires, battery cables, or other electrical components should be clear of headers
and/or connector pipes.
If removed, make sure the dipstick is installed properly and that it has been replaced.
Double-check the tightness of all bolts including brackets and accessories.
Perform these checks again after the first 1000 miles.
Check clearance and tightness of front driveshaft.
START THE ENGINE
Start the engine and allow it to warm up to operating temperature.
Caution! Hot parts! Wear protective clothing as needed.
Check for any unusual noises or exhaust leaks. If every thing is OK, stop the engine and
tighten all bolts while the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten after the
first 500 miles and then again at 1000 miles.
PARTS LIST
Qty. Description
1
Right side header
1
Left side header
2
Header gaskets
2
Collector gaskets
2
Reducers
2
O
2
sensor plugs
1
Decal:
DOUG’S HEADERS
1
Hardware kit:
16
3/8”-16 x 1” flanged header bolts
22
3/8” lock-washer
6 3/8”-16 x 1-1/4” hex bolts
6
3/8” hex nuts