Nikon Speedlight SB-700 - Manual (Page 132)

H–3
Tips on Speedlight Care and Reference Information
H
Warning indicators
Warning indicator Cause Solution 0
Battery power weak
indicator appears.
All operations have
stopped due to low
battery power.
Replace the
batteries.
B-10
Thermal cut-out
indicator appears.
All operations have
been suspended
because the SB-700
has overheated
and could become
damaged.
Allow the SB-700 to
cool down.
E-31
Safety circuit activation
indicator appears.
All functions other
than the power
switch are inoperable
because of power
abnormalities. Turn off the power,
remove the batteries,
and contact your
retailer or Nikon
representative.
—
The fl ash-ready
indicator blinks after
fi ring.
Underexposure may
have occurred.
Use a wider aperture
or move the fl ash
unit closer to the
subject and reshoot.
C-5
C-15
D-28
The remote fl ash unit
beeps for approx.
3 seconds.
Underexposure may
have occurred.
Use a wider
aperture, move the
fl ash unit closer
to the subject or
change the position
of the fl ash unit and
reshoot.
D-28
Troubleshooting