Nikon Speedlight SB-700 - Manual (Page 133)

H–4
Tips on Speedlight Care and Reference Information
H
Warning indicator Cause Solution 0
Incompatible
camera warning
(CLS-compatible)
The power switch/
wireless mode switch
for multiple fl ash units
is set to [MASTER] when
used with a camera
not compatible with
Advanced Wireless
Lighting multiple fl ash-
unit photography.
Set the power
switch/wireless mode
switch for multiple
fl ash units to [ON].
F-1
Incompatible
camera warning
(non-CLS-compatible)
The mode selector is set
to [TTL] or [GN], or the
power switch/wireless
mode switch for multiple
fl ash units is set to
[MASTER] or [REMOTE]
when used with a non-
CLS-compatible camera.
Set the power
switch/wireless mode
switch for multiple
fl ash units to [ON]
and the mode
selector to [M].
F-1
Bounce fl ash warning
Distance-priority
manual fl ash mode
was set while the fl ash
head was tilted up or
rotated to the right
or left.
Return the fl ash head •
to the front position
or tilt it downward.
Set the fl ash mode to
•
i-TTL or manual fl ash.
C-14
Power zoom function
does not work
properly.
Turn the SB-700 •
off and on again.
If the warning
•
indicator remains,
contact your
retailer or Nikon
representative. —