Operation, 1 turning on the power, Turning on the power – Nikon LS-1000 User Manual
Page 26
Advertising
- 26 -
5. Operation
5.1
Turning on the Power
Turn the LS-1000 on first, the other SCSI devices next, and the
host computer last.
After turning the power on, the LED will begin to blink to
indicate scanner initialization.
POWER
ON
Remarks
• To turn the LS-1000 power off, turn the host computer off first,
the other SCSI devices next, and the LS-1000 last (reverse order
from switching on).
• Once the power is turned off, please wait five seconds or more
before turning the power on again.
• Do not turn the power on/off while the scanner is scanning.
Advertising