Nikon D7100 - Manual (Page 266)

238
U
Choose how long the monitor remains on when no operations
are performed during playback (Playback; defaults to 10 s) and
image review (Image review; defaults to 4 s), when menus
(Menus; defaults to 1 minute) or information (Information
display; defaults to 10 s) are displayed, or during live view and
movie recording (Live view; defaults to 10 minutes). Choose a
shorter monitor-off delay for longer battery life.
Choose how long the camera will remain on stand-by in remote
control mode (0 127). If no operations are performed for the
selected period, remote shooting will end and Off will
automatically be selected for Remote control mode (ML-L3) in
the shooting menu. Choose shorter times for longer battery life.
Choose the pitch and volume of the beep that sounds when the camera focuses
using single-servo AF (AF-S or when single-servo AF is selected for AF-A; 0 71), when
focus locks during live view photography, while the release timer is counting down in
self-timer (0 59) and delayed remote modes (0 127), when a photograph is taken in
quick-response remote or remote mirror-up mode (0 127), or if you attempt to take
a photograph when the memory card is locked (0 31). Note that a beep will not
sound in movie live view (0 161) or quiet-shutter release mode (mode J; 0 57),
regardless of the option selected.
• Volume: Choose 3 (high), 2 (medium), 1 (low) or Off (mute).
When an option other than Off is selected, c appears in the
information display.
• Pitch: Choose High or Low.
c4: Monitor off Delay
G
button ➜ A Custom Settings menu
c5: Remote on Duration (ML-L3)
G
button ➜ A Custom Settings menu
d: Shooting/Display
d1: Beep
G
button ➜ A Custom Settings menu