Nikon D7100 User Manual

Page 372

Advertising
background image

344

n

A

Using the Built-in Flash

When using the built-in flash, be sure the subject is at a range of at least 0.6 m (2 ft) and
remove lens hoods to prevent vignetting (shadows created where the end of the lens
obscures the built-in flash).

Camera

Zoom position

Minimum distance without vignetting

D5000, D3100, D3000

18 mm

2.5 m/8 ft 2 in.

24 mm

1.0 m/3 ft 3 in.

D5200, D5100, D3200

18 mm

3.0 m/9 ft 10 in.

24 mm

1.0 m/3 ft 3 in.

D700, D7100, D7000, D300 series,

D200, D100, D80

All

No vignetting at any focus distance

D90, D70 series

18 mm

1.5 m/4 ft 11 in.

24–105 mm

No vignetting at any focus distance

D50

18 mm

1.0 m/3 ft 3 in.

24–105 mm

No vignetting at any focus distance

D60, D40 series

18 mm

2.5 m/8 ft 2 in.

24 mm

1.0 m/3 ft 3 in.

35–105 mm

No vignetting at any focus distance

Because the built-in flash units for the D100 and D70 can only cover the angle of view of a
lens with a focal length of 20 mm or more; vignetting will occur at a focal length of 18 mm.

D

Lens Care

• Keep the CPU contacts clean.
• Use a blower to remove dust and lint from the lens surfaces. To remove smudges and

fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth
or lens-cleaning tissue and clean from the center outwards using a circular motion, taking
care not to leave smears or touch the glass with your fingers.

• Never use organic solvents such as paint thinner or benzene to clean the lens.
• The lens hood or NC filters can be used to protect the front lens element.
• Attach the front and rear caps before placing the lens in its flexible pouch.
• When a lens hood is attached, do not pick up or hold the lens or camera using only the

hood.

• If the lens will not be used for an extended period, store it in a cool, dry location to prevent

mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls.

• Keep the lens dry. Rusting of the internal mechanism can cause irreparable damage.
• Leaving the lens in extremely hot locations could damage or warp parts made from

reinforced plastic.

Advertising