Nikon L25 - L26 - Manual (Page 42)

22
The
Basic
s of
Shootin
g
and Playbac
k
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for approximately another
three minutes, the camera will turn off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the following
operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
• The time that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu ( A 86).
• By default, the camera enters standby mode in about 30 seconds when you are using shooting
mode or playback mode.
970 970
15m 0s 15m 0s
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.