Using the flash (flash modes), A 50) may fir, H mode (a 50), self – Nikon L25 - L26 User Manual

Page 70: A 50)

Advertising
background image

50

Sh

ooting Feat

ur

es

Using the Flash (Flash Modes)

You can set the flash mode.

1

Press the multi selector H (m flash mode).

2

Press the multi selector H or I to select the
desired mode and press the k button.

Available Flash Modes

A 51

If a setting is not applied by pressing the

k button within

a few seconds, the selection will be canceled.

When U (auto) is applied, D is only displayed for a

few seconds, regardless of Monitor settings (

A 86,

E45).

Auto

C

The Flash Lamp

The flash lamp indicates the status of the flash when you press the
shutter-release button halfway.

On: The flash fires when a picture is taken.

Flashing: The flash is charging. The camera cannot take pictures.

Off: The flash will not fire when a picture is taken.

If the battery is low, the monitor will turn off while the flash is charging.

C

Effective Range of the Flash

For L26, the flash has a range of approx. 0.5 to 3.6 m (1 ft 8 in. to 11 ft) at the maximum wide-angle
zoom position and a range of approx. 0.8 to 1.7 m (2 ft 8 in. to 5 ft 6 in.) at the maximum telephoto
zoom position. For L25, the flash has a range of approx. 0.3 to 4.2 m (1 ft to 13 ft) at the maximum
wide-angle zoom position and a range of approx. 0.6 to 1.6 m (2 ft to 5 ft 2 in.) at the maximum
telephoto zoom position.

Advertising