Nikon J1 - Manual (Page 60)

48
n
Power sources • Rechargeable Li-ion Battery EN-EL20 ( 0 71): Additional EN-EL20
batteries are available from local retailers and Nikon-
authorized service representatives.
• Battery Charger MH-27 ( 0 71): Recharge EN-EL20 batteries.
• Power Connector EP-5C, AC Adapter EH-5b: These accessories can
be used to power the camera for extended periods
(EH-5a and EH-5 AC adapters can also be used). An EP-5C
power connector is required to connect the camera to
the EH-5b, EH-5a, or EH-5; see page 51 for details.
Remote
controls Wireless Remote Control ML-L3 ( 0 36): The ML-L3 uses a 3 V
CR2025 battery.
Pressing the battery-chamber latch to the right (q), insert
a fingernail into the gap and open the battery chamber
(w). Ensure that the battery is in the correct orientation
(r).
Software Capture NX 2 : A complete photo editing package offering
such features as white balance adjustment and color con-
trol points.
Note : Use the latest versions of Nikon software; see the web-
sites listed on page ii for the latest information on supported
operating systems. At default settings, Nikon Message Cen-
ter 2 will periodically check for updates to Capture NX 2 and
other Nikon software and firmware while you are logged in
to an account on the computer and the computer is con-
nected to the Internet. A message is automatically displayed
when an update is found.