Camera – Nikon D4 User Manual
Page 190
164
r
❚❚Measuring a Value for White Balance
1
Light a reference object.
Place a neutral gray or white object under the lighting that will
be used in the final photograph. In studio settings, a standard
gray panel can be used as a reference object. Note that
exposure is automatically increased by 1 EV when measuring
white balance; in exposure mode h, adjust exposure so that
the exposure indicator shows ±0 (
2
Set white balance to
L (Preset manual).
Press the
U button and rotate the main command dial until
L is displayed in the rear control panel.
3
Select a preset.
Press the
U button and rotate the sub-command dial until
the desired white balance preset (d-1 to d-4) is displayed in
the rear control panel.
Rear control panel
U button
Main command dial
Rear control panel
U button
Sub-command dial