Nikon P340 - Manual (Page 118)

96
U
sin
g th
e Wi
-F
i (W
irel
ess LAN
) F
u
nc
tion
To Terminate the Wi-Fi Connection
• Turn off the camera.
• Set the Wi-Fi setting on the smart device to Off.
B
Notes About Wi-Fi Connection
• Connect to smart device cannot be selected in the following situations:
- When no memory card is inserted in the camera.
- When an Eye-Fi card (
E80) is inserted in the camera.
- When the camera is connected to a TV, computer, or printer.
- When the battery level indicator in the monitor indicates
B
. In addition, if the
battery level indicator becomes low when Wi-Fi is connected, the connection is
terminated.
• Terminate the Wi-Fi connection in a place where the use of radio waves is
prohibited.
• When Wi-Fi is connected, Auto off is disabled.
• When Wi-Fi is connected, the battery drains faster than normal.
• It may take some time until the SSID is displayed on the smart device after
Connect to smart device is performed.
C
Notes About Security Settings
If the camera is installed with the Wi-Fi function without proper security settings
(encryption and password), unauthorized third parties may access the network and
cause harm. We strongly recommend performing the required security settings
before using the Wi-Fi function.
Use Options in the Wi-Fi options menu ( E63) to perform the security settings.