Nikon P340 - Manual (Page 70)

48
Sh
ooting Fea
tures
A (Programmed auto)
Use for automatic control of the exposure by the
camera.
• Different combinations of shutter speed and
aperture value can be selected without
changing the exposure by rotating the
command dial (“flexible program”). While
flexible program is in effect, a flexible program
mark (A) is displayed next to the mode indicator (
A) in the upper left of the
monitor.
• To cancel flexible program, rotate the command dial until the flexible
program mark (A) is no longer displayed. Selecting another shooting
mode, or turning off the camera, also cancels flexible program.
B (Shutter-priority auto)
Use to shoot fast-moving subjects at a fast shutter
speed, or use to emphasize the movements of a
moving subject at a slow shutter speed.
• The shutter speed can be adjusted by rotating
the command dial.
C (Aperture-priority auto)
Use to bring subjects including both the
foreground and background into focus or blur
the subject’s background intentionally.
• The aperture value can be adjusted by rotating
the multi selector.
D (Manual)
Use to control the exposure according to
shooting requirements.
• When adjusting the aperture value or shutter
speed, the degree of deviation from the
exposure value measured by the camera is
displayed in the exposure indicator of the
monitor. The degree of deviation in the
exposure indicator is displayed in EVs (
– 2 to +2
EV in increments of 1/3 EV).
• The shutter speed can be adjusted by rotating the command dial and the
aperture value can be adjusted by rotating the multi selector.
1/250 1/250 1/250 F5.6 F5.6 F5.6
25m 0s 25m 0s 25m 0s
840 840
1/250 1/250 1/250 F5.6 F5.6 F5.6
25m 0s 25m 0s 25m 0s
840 840
1/250 1/250 1/250 F5.6 F5.6 F5.6
25m 0s 25m 0s 25m 0s
840 840
1/250 1/250 1/250 F5.6 F5.6 F5.6 840 840
25m 0s 25m 0s 25m 0s
Exposure indicator