Flash photography, Using the built-in flash – Nikon D610 User Manual
Page 169
143
l
l
Flash Photography
The built-in flash has a Guide Number (GN) 12/39 (m/ft, ISO 100, 20 °C/68 °F) and
provides coverage for the angle of view of 24 mm lens, or a 16 mm lens in DX format.
It can be used not only when natural lighting is inadequate but to fill in shadows and
backlit subjects or to add a catch light to the subject’s eyes.
❚❚Using the Built-in Flash: i, k, p, n, o, s, and w Modes
1
Choose a flash mode (
2
Take pictures.
The flash will pop up as required when the
shutter-release button is pressed halfway, and fire
when a photograph is taken. If the flash does not
pop up automatically,
DO
NOT
attempt to raise it by
hand. Failure to observe this precaution could
damage the flash.
❚❚Using the Built-in Flash: P, S, A, M, and 0 Modes
1
Raise the flash.
Press the
M (Y) button to raise the flash.
2
Choose a flash mode (P, S, A, and M modes
only;
3
Take pictures.
The flash will fire whenever a picture is taken.
Using the Built-in Flash
A
Metering
Select matrix or center-weighted metering to activate i-TTL balanced fill-flash for digital SLR.
Standard i-TTL flash for digital SLR is activated automatically when spot metering is selected.
M (Y) button