Nikon D610 - Manual (Page 267)

241
U
If On is selected when the camera is being used with the built-in
flash or an optional CLS-compatible flash unit (
0 294), a
modeling flash will be emitted when the camera depth-of-field
preview button is pressed (
0 77). No modeling flash is emitted
if Off is selected.
Choose the setting or settings bracketed when auto bracketing ( 0 153) is in effect.
Choose AE & flash ( j) to perform both exposure and flash-level bracketing, AE only
( k) to bracket only exposure, Flash only (l) to perform only flash-level bracketing,
WB bracketing ( m) to perform white-balance bracketing (0 156), or ADL
bracketing ( y) to perform bracketing using Active D-Lighting (0 158). Note that
white balance bracketing is not available at image quality settings of NEF (RAW) or
NEF (RAW) + JPEG.
At the default setting of MTR > under > over ( H), exposure, flash, and white balance
bracketing are performed in the order described on pages 153 and 156. If
Under > MTR > over (
I) is selected, shooting will proceed in order from the
lowest to the highest value. This setting has no effect on ADL bracketing.
Choose the role played by the J button during shooting: selecting the center focus
point ( J Select center focus point), highlighting the active focus point
( K Highlight active focus point), or none (Not used).
e5: Modeling Flash
G button
➜ A Custom Settings menu
e6: Auto Bracketing Set G button
➜ A Custom Settings menu
e7: Bracketing Order G button
➜ A Custom Settings menu
f: Controls
f1: OK Button (Shooting Mode) G button
➜ A Custom Settings menu