Nikon D610 - Manual (Page 220)

194
Q
Connecting the Camera
Connect the camera using the supplied USB cable.
1
Turn the camera off.
2
Turn the computer on.
Turn the computer on and wait for it to start up.
3
Connect the USB cable.
Connect the USB cable as shown.
4
Turn the camera on.
5
Start Nikon Transfer 2.
If a message is displayed prompting you to choose a program, select
Nikon Transfer 2.
D
USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub
or keyboard.
A
Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as described below.
1 Under Import pictures and videos, click Change
program. A program selection dialog will be
displayed; select Import file using
Nikon Transfer 2 and click OK.
2 Double-click Import file.