Custom setting d1: cl-mode shooting speed – Nikon D2Xs User Manual

Page 211

Advertising
background image

197

Menu Guide—Custom Settings

Custom Setting d1: CL-Mode Shooting Speed

This option determines the rate at which photographs can be taken in C

L

(continuous low-speed) mode (during interval timer photography, this set-
ting also determines the frame advance rate for single-frame and mirror-up
modes). Shooting speed can be set to values between 1 and 7 frames per
second (fps); the default value is 3 fps. Regardless of the setting chosen,
the maximum speed when Hi-speed Crop is Off is 4 fps (

41). The frame

advance rate may drop at slow shutter speeds.

Highlight d1 Shooting speed in the second level
of the CSM menu (

181) and press the multi

selector to the right. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.

Custom Setting d2: Max No. of Shots Taken in Continuous Shooting

The maximum number of shots that can be taken
in a single burst in continuous mode can be set to
any value between 1 and 60. Highlight d2 Maxi-
mum shots
in the second level of the CSM menu
(

181) and press the multi selector to the right.

Press the multi selector up or down to choose the
number of shots, then press to the right to make a selection.

The Memory Buffer (

44)

The following table shows the maximum number of shots that can be taken before the
memory buffer fi lls and shooting slows:

Quality

Hi-speed crop: Off

Hi-speed crop: On

Uncompressed NEF (RAW) + JPEG

16

28

Compressed NEF (RAW)+JPEG

Uncompressed NEF (RAW)

17

29

Compressed NEF (RAW)

TIFF RGB

16

28

JPEG

22

38

The above fi gures assume that ISO sensitivity is set to ISO 100, long exposure noise
reduction is off (

175), and that Size priority is selected for JPEG compression (

47).

Advertising