Nikon D2Xs - Manual (Page 222)

208
Menu Guide—Custom Settings
Custom Setting f4: FUNC. Button Press
This option controls the operation performed
when the FUNC. button is pressed. Highlight f4
FUNC. button in the second level of the CSM
menu (
181) and press the multi selector to
the right. Press the multi selector up or down
to highlight an option, then press to the right to
make a selection.
Option Description
FV lock
If attached Speedlight supports Creative Lighting System (CLS), fl ash
value locks when FUNC. button is pressed. Press again to cancel FV
lock.
None
(default)
No operation is performed when FUNC. button is pressed.
Flash off Flash will not fi re in photos taken while FUNC. button is pressed.
Same as
AE-L/AF-L FUNC. button performs same functions as AE-L/AF-L button.
Bracketing
burst
While FUNC. button is pressed, all shots in exposure or fl ash bracketing
program will be taken each time shutter-release button is pressed. In
continuous high-speed and continuous low-speed modes, camera will
repeat bracketing burst while shutter-release button is held down. If
white-balance bracketing is selected, camera will take photos at up
to 8 fps (single or continuous high-speed mode) or 1–7 fps (continu-
ous low-speed mode) and perform white balance bracketing on each
frame.
Center-
weighted Center-weighted metering activated while FUNC. button is pressed.
Matrix
metering
Matrix metering activated while FUNC. button is pressed.
Spot
metering
Spot metering activated while FUNC. button is pressed.