elektraLite PaintCan 2.0 - Manual (Page 2)

- １ -
Every person involved with the installation, operation and maintenance of Paintcan has to:
-be qualified
-follow carefully the instructions of this manual
Introduction :
Thank you for choosing Paintcan.
When you unpack Paintcan, there should be in the box the fixture, a power cable, a safety cable and a
CD. Please check carefully that there is no damage caused in shipping. If you notice any damage then
immediately let your shipper know and the dealer from whom you purchased Paintcan.
Features:
operation mode is by DMX 512 utilizing (8 channels).
colors: 1 color wheel with 3 dichrioc filters plus CT to 5600ºK, White and rainbow effect.
strobe : via color wheel’s closed and open position being utilized.
dimmer : in built electronic fully adjustable from 0% to 100%
Advanced Cyan Magenta and Yellow color mixing system .
auto-program: 8 preprograms can be selected
display: can be inverted (180)° when Paintcan is hung upside down.
local or remote resetting of motors
auto test for all functions
value of each DMX-channel can be displayed
editable program:
edit and save a program to the on board processor using either the controls on the front panel or
using an external controller like an Elektralite CP-20. A maximum 48 scenes/cues/looks can be
saved on board. The resultant saved program can be played back from the “run” menu accessed from
the front display panel