elektraLite PaintCan 2.0 - Manual (Page 3)

- ２ -
Safety Instructions.
This fixture has left the factory in perfect condition. In order to maintain this condition and to ensure a
safe operation, it is absolutely essential for the user to follow the safety instructions and warning notes
written in this user manual. Paintcan is a high voltage fixture. Be careful when dealing with high
voltages.
Please read this manual. If you do not read this manual and damages occur to Paintcan, then it
could void the warranty.
During shipping, Paintcan may have been exposed to high temperature changes or humidity changes.
So, as a precaution, do not switch Paintcan on immediately. Condensation can damage Paintcan so
leave Paintcan switched off until it has reached room temperature.
The electric connection must be carried out by a qualified person and it is absolutely essential that
Paintcan
be grounded.
Always disconnect Paintcan from the power source, when the device is not in use or before cleaning it.
Only unplug Paintcan from the power cord. Never pull out the plug out by pulling on the power cord.
Take care, Paintcan will heat up when it is turned on and it could be very hot to touch.
Please keep Paintcan away from children and the general public. Please be intelligent and use common
sense when operating Paintcan. If you don’t understand what that means don’t touch the
Paintcan!
General Guidelines.
Paintcan is a lighting fixture for professional use on stages, in clubs, theatres, churches etc.
Paintcan should only be operated at 120 volts and only indoors.
Paintcan should not be operated 24/7 (24 hours a day; 7 days a week). Paintcan needs operation
breaks to ensure that it will work for a long time without problems. Please do not shake Paintcan and
avoid using brute force when installing or operating it.
Please remember just because you cannot see any output of light from the fixture that does not
mean the fixture is off.
Turn the fixture off when not using it. If you don’t, fans can accumulate dust and
dirt. Lamp life will be ‘ticking’ down, if a preheat setting above zero has been chosen.
When choosing the location to install Paintcan, please make sure that it is not exposed to extreme heat,
moisture or dust. The minimum distance between Paintcan and the illuminated surface must be more
than 3 feet.
Always mount Paintcan with an appropriate safety cable. If you use the quick lock cam to hang
Paintcan
, please make sure the 4 quick lock fasteners are locked into position correctly.
Operate Paintcan only when you are familiar with the features on the fixture. Do not permit operation by
persons not qualified for operating it.
All modifications to Paintcan will invalidate the warranty. There are absolutely no exceptions.
If Paintcan is operated in any way different to the ones described in this manual, Paintcan maybe
damaged and the guarantee will be void.