elektraLite CP100 Manual Part One - Manual (Page 40)

40
WANNA PROGRAM FASTER?
HOW TO DIRECTLY ACCESS FEATURES OF YOUR LIGHTS
The CP-100 supports some direct access functions for your moving lights. Features such as color and
gobo can be directly accessed via the Color and Gobo buttons. The trick with these buttons and their
commands is that you really have to know your fixtures pretty well. The direct access of colors and
gobos is achieved by calling up its number.
If you’re using a Cyberlight you should have the ability to choose from 7 colors plus white. The stock
position for the red dichro is position 7 in the color wheel. So if you want to immediately call up red
all you have to do is press
COLOR-7-ENTER . There’s your red!
Color and Gobo access is applied to whichever individual fixture or fixture group was accessed last.
So if all of your Cyberlights are in Fixture Group 1 and you want to make them all red you would
access Group 1 first and then press
COLOR-7-ENTER .
Likewise, the direct access of Gobos works in the same manner.
So the next question is what to do when a fixture has more than one color or gobo wheel. We’ll
simply tell the console that. Press
COLOR-2-@-7-ENTER .
See the Command Set of the manual for more information on:
EDITING IN THE CUE EDITOR