elektraLite CP100 Manual Part One - Manual (Page 8)

8
THE MAIN MENU
The CP-100 MAIN MENU is the first display that you will see upon start up of the controller.
Main Menu Display
CP-100 MAIN MENU 4:59pm
F1 Storage F4 Miscellany
F2 Hotkeys F5 Triggers
F3 Clock setting
Each of the function keys just below the display will access the specific submenus.
The menus are as follows:
•
STORAGE
This submenu allows you access to the storage of information onto disk.
.
Storage Display
STORAGE: Name:
F1 Objects
F2 Software
F3 Memory
Within the STORAGE menu you are able to save & load the objects within the controller. The
objects consist of fixtures and show information. You are able to save & load just the fixtures in your
show, save & load just the show information itself (Cues, Chases, etc.), or save & load all of your
information.
Objects Display
OBJECTS:
F1 Save all F4 Load all
F2 Save fixtures F5 Load fixtures
F3 Save show F6 Load show
•
SOFTWARE
The SOFTWARE display allows for the saving and loading of different versions of software. After
inserting a software disk into the diskette drive and accessing the SOFTWARE display, the readout
will show you which version of software is currently installed into the CP-100 and which version is on
the diskette.
Software Display
SOFTWARE:
F1 Save software This version: 1.07
F2 Load software Disk version: 1.14