elektraLite CP100 Manual Part One - Manual (Page 9)

9
•
MEMORY
The MEMORY display also allows you to view the amount of total memory that has been used. Since
there is no specific limit to the actual number of Cues, Chases, Macros, Presets, etc. that you can store
the percentage readout is used to monitor the controllers memory performance.
Memory Display
MEMORY USAGE: NV Objects: 211
Free RAM: 3011840 Free NVRAM: 120672
Used RAM: 130560 Used NVRAM: 10400
% Used: 4 % NV Used: 1
•
HOTKEYS
The HOTKEY EDITOR display allows for the quick programming of multiple button press
commands that can be accessed through an external keyboard. So a single button on the keyboard cold
save you multiple keystrokes on the board.
Hotkey Editor Display
HOTKEY EDITOR: Key: Alt+A
F1 Delete Name:
Clear All Enter
•
CLOCK
Yeah, this thing’s got a clock on it so that you can see just how much overtime you’re putting in. To
change the time and dates simply use the cursor keys to move the cursor to the appropriate field, either
type the desired number and press ENTER or use the +YES/-NO keys to increment the numbers up
and down.
Clock Setting Display
CLOCK SETTING:
Wed _3/27/97 _3:13 pm
•
MISCELLANY
This dandy little menu allows access to all sorts of cool stuff.
Miscellany Display
MISCELLANY:
Audio sens.: 8 Mouse speed: 5
Lock: on Mouse swap: 01
Record time: no Footswitch: go
•
AUDIO SENS
As you may have guessed, this allows you to set the sensitivity of an incoming audio signal when