elektraLite CP100 Manual Part One - Manual (Page 43)

43
Let’s say that you want to create a Hotkey command that will allow you to add Cues to Submasters.
Follow all the steps above as normal. When you get to step 5 you would press the command: ADD-
CUE-UNDO-TO-SUBMASTER-UNDO. The “undo” becomes a sort of pause prompt when you
replay this Hotkey. When you press the Hotkey the first part of the command will automatically
appear on the display.
ADD-CUE
Then you type the number of the Cue and press ENTER. At this time the second part of the command
will appear.
ADD-CUE-n-TO-SUBMASTER
Then you type the number of the Submaster and press ENTER. The display will quickly read DONE.
You’ve just created a multi-part Hotkey.