elektraLite CP3 - Manual (Page 8)

7
LAMP STRIKE
Certain lighting fixtures will require you to remotely strike or turn on the lamps separately from
the fixture’s normal power supply. Please consult the individual manufacturers user manual(s) of
the lighting fixtures that you intend to control for specific information regarding lamp strike.
The lamp strike function is in-built into the preprogrammed light show mode only. Utilizing a
lamp strike function in the replay controller mode would be a function of the programming of
the CP-10xt.
The CP-3 will automatically perform a lamp strike cue when it is powered up. For this reason it
is particularly important to have all of your lighting fixtures cabled, powered up, and finished
with all their respective resets.
BLACK
Pressing the “BLACK” button sets all DMX 512 channels to 0%. It also turns off any currently
running lightshow.
TEMPO
When a lightshow is running, its tempo speed can be manually adjusted by pressing the
“TEMPO” button twice to the beat of the music. The “TEMPO” button’s LED will flash to the
adjusted beat when engaged. If audio is controlling the speed of the lightshow, this button will
have no effect.
AUTO START
When the CP-3 is powered down it will keep track of any lightshow that was running. When
powered up it will restart the lightshow automatically from the beginning of the light show. This
auto start applies to both the preprogrammed light show and the replay controller modes.