elektraLite MY 575w - Manual (Page 2)

-
１ - MY575 WASH
For your own safety, please read this user manual carefully before installing MY575w.
Every person involved with the installation, operation and maintenance of MY575w has to:
-be qualified
-follow carefully the instructions of this manual
Introduction :
Thank you for choosing MY575w.
When you unpack MY575w, there should be in the box the fixture, a power cable, a DMX
XLR cable, a safety cable and a CD. Please check carefully that there is no damage caused in shipping. If you
notice any damage then immediately let your shipper know and the dealer from whom you purchased
MY575w
.
Features:
9 Operation mode is by DMX 512 utilizing (16 channels) or stand alone or sound activation.
9 Pan and Tilt movement
9 8 bit and 16 bit resolution for smooth and precise motion
9 Pan : 630° rotation / Tilt : 265° rotation. (Pan can be selected for 540º if desired).
9 Speed of pan/tilt movement adjustable
9 Advance Color mixing system. Cyan, Magenta & Yellow. The colors range goes extremely deep giving
the Lighting Designer a large palette of colors
9 Additional color wheel with 5 dichroics plus white. Also included is 2 color temperature correction filters.
(1 = 3200ºK and 1 = 5600ºK filters).
9 Strobe/shutter : high speed dual-blade shutter, 0-15Hz or random strobe
9 Dimmer : mechanical adjustable from 0% to 100%
9 Auto-program: 8 preprograms can be selected
9 Display: can be inverted (180)° when MY575w is hung upside down.
9 Local or remote resetting
9 Lamp switches ON/OFF locally or remote, motor reset
9 Auto test for all functions
9 Value of each DMX-channel can be displayed
9 Editable program:
edit and save a program to the on board processor using either the controls on the front panel or using an
external controller like an Elektralite CP-20. A maximum 48 scenes/cues/looks can be saved on board. The
resultant saved program can be played back from the “run” menu accessed from the front display panel