elektraLite MY 575w - Manual (Page 8)

-
７ - MY575 WASH
Default settings shaded.
Main
menu
Sub menu Extension Display Function
VALU A001~A511 (AXXX) DMX address setting
ADDR
SLAV ON/OFF (SLAV) Slave setting
ALON (AU-A)
Automatic Program Run
in Stand Alone mode
AUTO
MAST (AU-M)
Automatic Program Run
as Master
ALON (SO-A)
Sound-controlled Program
Run in Stand Alone mode
RUN
SOUN
MAST (SO-M)
Sound-controlled Program
Run as Master
VALU
D–00 ~ D-30
(DXXX) Display the DMX 512 value
of each channel
RDIS ON/OFF 180º Reverse display
0 MODE
DISP
CLDI ON/OFF Shut off LED display
OPEN ON/OFF Lamp on/off
ONLI ON/OFF Lamp on/off via controller 1 LAMP
DELA D–00 ~ D-59,D-15 Delay lamp on
RPAN ON/OFF Pan Reverse
VER V1.0-V9.9 Software Version
LODA ON/OFF Restore Default factory setting
REST ON/OFF Reset
DEGRE 540/630 540º or 630º Pan Degrees
16BI 8/16 8 or 16 Bit control
2 SET
RTIL ON/OFF Tilt Reverse
LADJ ON/OFF Lamp adjustment
3 ADJU
TEST T–01 ~ T–30 Test function of each channel
MATI 0000~9999 (hours) Fixture running time
LATI 0000~9999 (hours) Lamp running time
CLMT ON/OFF Clear fixture time
4 TIME
CLLT ON/OFF Clear lamp time
STEP S–01 ~ S–48 Steps of Program Run
C–01 ~ C–30
01XX (00~FFH)
30XX (00~FFH) Edit the channels of each
scene/cue/look
TIME (sec.) T – – X (1~9) Time for each scene/cue/look
5 EDIT
SC01
~
SC48
CNIN ON/OFF Edit program via controller