Ferguson Ariva HDplayer 210 - Manual (Page 26)

22
ENGLISH
Setup Menu Options
This Player setup is carried out via the
TV, enabling you to customise the Ariva
player to suit your particular requirement.
Audio setup menu
A
Press SETUP button.
B
Press   to select Audio tab.
Digital Audio Setup
A
In Audio setup tab, use   keys to
highlight “Digital Output”, then press OK.
B
Use   keys to select a setting and
press OK to confirm.
Helpful Hint:
 If “Digital Output” is set to one of
“LPCM“ modes, then Ariva player will
transcode supported audio tracks.
 If “Digital Output” is set to one of
“RAW“ modes, then Ariva player will pass
untouched audio bitstream to external
device.
Video setup menu
A
Press SETUP button.
B
Press   to select Video tab.
TV System
This menu contains the options for
selecting the colour system (PAL or NTSC)
and HDMI resolution that matches the
connected TV.
A
In Video tab, press  to highlight
“Video system”, then press OK.
B
Pressto select a setting:
480p: Progressive output in 480 lines for
NTSC TV.
576p: Progressive output in 576 lines for
PAL TV.
720p: Progressive output 720 lines.
1080i: Interlaced output 1080 lines.
1080p: Progressive output 1080 lines.
HDMI Auto: Output automatically based
on your display’s supported resolution.
C
Press OK to confirm.
Helpful Hint:
 If not display appears on the TV screen
due to unsupported resolution, use TV-
SYS button on RCU or reconnect any
available interlace video output to your
display and re-adjust the resolution
settings to 576p.
 Select HDMI AUTO to automatically
display the best resolutions settings.

60Hz may not be supported by
european TVs. It is value specific to TVs for
USA market.