HID EntryProx Installation Guide User Manual
Page 44

Part No. 4045-905, Rev C.2 EntryProx
™
User Guide
3. Place the Palm IR receiver within 1/2” of the EntryProx
IR LED (to the right of the yellow LED)
4. On the EntryProx, press 70 # 0 # 0 # **
The PDA will display a progress bar while collecting the
data, and when done will display End of Dump
(download). You can touch Close/Stop on the PDA or
wait for the unit to time out.
When prompted for a Session Name, you can place
your stylus on the line containing the date information
and add to it or replace it with descriptive text.
5. Press * to exit program mode
The 70 command is logged in the transaction buffer (in
memory), providing a reference as to when the log was
downloaded. Figure 12 shows a sample Transaction
Log.
Figure 12 Transaction Log
Page 44 of 58
February 7, 2007
© 2007 HID Global Corporation. All rights reserved.