Karcher KM 130-300 D - Manual (Page 25)

- 10
 Open the fuse holder.
 Check the fuses.
Note: The fuse FU 01 is located in the en-
gine compartment.
 Replace defective fuses.
Note: Only use fuses with identical safety
ratings.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2011/03/01
Replacing fuses
FU 01 Main fuse 60 A
FU 04 Fuel pump 10 A
FU 09 Left lighting 7,5 A
FU 10 Right lighting 7,5 A
FU 11 Front work lights (low
beam) 10 A
FU 06 Solenoid valve drive 7,5 A
FU 07 Program selection
switch
Waste container func-
tions 10 A
FU 08 Safety relay 7,5 A
FU 03 Multifunction display 3 A
FU 13 Water pump 10 A
FU 05 Time relay
Seat contact switch 25 A
FU 02 Horn
Wiper 7,5 A
FU 12 Vibrator system
Beacon lamp 20 A
EC Declaration of Conformity
Product: Ride-on vacuum sweeper
Type: 1.186-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2004/108/EC
2000/14/EC
Applied harmonized standards
EN 60335–1
EN 60335–2–72
EN 55012: 2007 + A1: 2009
EN 55014–2: 1997+A1: 2001+A2: 2008
Applied national standards
-
Applied conformity evaluation method
2000/14/EC: Appendix V
Sound power level dB(A)
Measured: 99
Guaranteed: 102
CEO Head of Approbation
25 EN