Karcher KM 75-40 W Bp Pack - Manual (Page 19)

- 8
 Open the locking screw of the dust filter
cover in an anticlockwise direction.
 Lift the dust filter cover.
 Replace dust filter Make sure the dust
filter is inserted correctly (see figure).
 Screw in the locking screw all the way.
CAUTION
If the locking screw is not tightened all the
way, there may be damages.
Note: Make sure when installing the new
filter that the fins are not damaged.
 KM 75/40 W Bp
1 Fuse F1 (50 A)
2 Fuse F2 (2 A)
3 Relay
4 Battery charge plug
 Open the device hood.
 Replace defective fuse or relay.
 KM 75/40 W Bp Pack
The fuses are located in the charger.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2012/04/01
Replace fuse/ relay
Accessories
Side-brushes, soft 6.905-626.0
For fine dust on inside surfaces; wetness
resistant.
Roller-brush, soft
6.906-886.0
With natural bristles: especially for sweep-
ing fine dust on smooth floors indoors.
Not resistant to wetness; do not use on
abrasive surfaces!
Roller-brush, hard
6.906-885.0
For removing stubborn dirt in the external
area; resistant to moisture.
Roller brush, antistatic
6.906-950.0
For statically chargeable surfaces such as
carpet or artificial turf
Carpet sweeping unit
2.641-571.0
Includes: Lint trap, antistatic roller brush,
triple steering roller
EC Declaration of Conformity
Product: Vacuum sweeper
Type: 1.049-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2004/108/EC
2000/14/EC
Applied harmonized standards
EN 55012: 2007 + A1: 2009
EN 60335–1
EN 60335–2–72
EN 61000–6–2: 2005
EN 62233: 2008
KM 75/40 W Bp Pack
EN 60335–2–29: 2004+A2: 2010
EN 61000–3–2: 2006+A1: 2009+A2: 2009
EN 61000–3–3: 2013
Applied national standards
---
Applied conformity evaluation method
2000/14/EC: Appendix V
Sound power level dB(A)
Measured:
79
Guaranteed: 81
CEO Head of Approbation
19 EN