Sony TDM-NC1 - Manual (Page 26)

26 GB
If you have more than one TDM-NC1/CPF-
IX001, you can enjoy listening to the same
music in different rooms.
Register one TDM-NC1/CPF-IX001 as the
‘host’ unit, and the other(s) TDM-NC1/CPF-
IX001 can play the same music as ‘guest’
unit(s).
Notes
• If you use CPF-IX001, you need to perform firmware
updates from the following Sony websites:
USA:
http://esupport.sony.com/?ref=http%3A//
www.sony.com/index.php
Canada:
http://www.sony.ca/sonyca/view/english/warranty/
consumer_support.shtml
Europe:
http://support.sony-europe.com/main/main.asp?l=en
• You cannot use the WEB RADIO function in
PARTY MODE.
• Guest unit operations are restricted.
• You can add up to four guest units, but depending on
the connection environment, the number of
connectable guest units may be fewer.
• Depending on the environment, some guest units
may lag in playback or cannot play. If this occurs,
remove those guest units.
Using the PARTY MODE
1
Turn on the connected AV system with
DIGITAL MEDIA PORT interface (Sony
DAV series, etc.) in each room.
2
Make sure each unit is connected to
the network.
3
Make sure the host unit is connected to
the media server in stop mode.
The following steps 4-6 are for the host unit
only.
4
Press MENU.
5
Press . / > until “PARTY MODE?”
appears, then press ENTER.
“START?” appears.
6
Press ENTER.
“Searching” appears. Wait until
“Searching” disappears.
Stopping the PARTY MODE
The following procedures are for the host unit
only.
1
Press MENU.
2
Press . / > until “PARTY MODE?”
appears, then press ENTER.
“END?” appears.
3
Press ENTER.
Blocking guest units from
joining the PARTY MODE
You can block some guest units from joining the
PARTY MODE. The default setting is
unblocked.
The following procedures are for the guest units
unit which you want to block.
1
Press MENU.
2
Press . / > until “PARTY MODE?”
appears, then press ENTER.
Listening to the same
music in different rooms
— PARTY MODE
./>
MENU
ENTER