Sony KDL-46X3500 - Manual (Page 22)

22 GB
Viewing pictures from
the connected
equipment
Turn on the connected equipment, then
perform one of the following operation.
For equipment connected to the scart sockets using a
fully-wired 21-pin scart lead (page 20)
Start playback on the connected equipment.
The picture from the connected equipment appears on
the screen.
For an auto-tuned VCR (page 7)
In analogue mode, press PROG +/–, or the number
buttons, to select the video channel.
For other connected equipment (page 20)
Press
/ to display the connected equipment list.
Press F / f to select the desired input source, then press
. (The highlighted item is selected if 2 seconds pass
without any operation after pressing F / f .)
When the input source is set to “Skip” in the “AV
Preset” menu under the “Set-up” menu (page 37), that
input does not appear in the list.
Additional operations
Using the Tools menu
Press TOOLS to display the following options when
viewing pictures from connected equipment.
To view two pictures simultaneously
– PAP (Picture and Picture)
You can view two pictures (external input and TV
programme) on the screen simultaneously.
Connect the optional equipment (page 20), and make
sure that images from the equipment appear on the
screen (page 22).
~
• This function is not available for a PC input source.
• You cannot change the size of the pictures.
1
Press TOOLS to display the Tools menu.
2
Press
F
/
f
to select “PAP”, then press .
The picture from connected equipment is
displayed on the left and the TV programme is
displayed on the right.
3
Press number buttons or PROG +/– to
select the TV channel.
To return to single picture mode
Press
or RETURN.
z
The picture framed in green is audible. You can switch the
audible picture by pressing
G
/
g
.
To Do this
Return to normal TV
mode Press DIGITAL/ANALOG.
Access the Input signal
index table (except
analogue mode) Press to access the Input
signal index table. To select an
input source, press
F / f , then
press .
Change the volume of
the connected HDMI
control compatible
audio system Press 2 +/–.
Mute the sound of the
connected HDMI
control compatible
audio system Press % .
Press again to restore.
Options Description
Close Closes the Tools menu.
Picture Mode See page 28.
Sound Mode See page 30.
Motion Enhancer See page 34.
Speaker See page 36.
PAP (except PC input
mode) See page 22.
PIP (in PC input
mode only) See page 23.
Auto Adjustment (in
PC input mode only) See page 33.
Horizontal Shift (in
PC input mode only) See page 33.
i Volume See page 36.
Sleep Timer (except
PC input mode) See page 37.
Power Saving See page 38.
Auto Clock Set Allows you to switch to digital
mode and obtain the time.