Sony SCD-XA1200ES - Manual (Page 6)

6 GB
Insert two R6 (size-AA) batteries into the
battery compartment with the + and – correctly
oriented to the markings. When using the
remote, point it at the remote sensor
on the
player.
Tip
Under normal conditions, the batteries should last for
about six months. When the remote no longer operates
the player, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or a
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatus. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Connect the Super Audio CD player to an audio
component. Be sure to turn off the power of all
components before making connections and
connect securely to prevent noise.
Connecting a stereo amplifier
or MD deck
When you connect a stereo amplifier or make an
analog connection with an MD deck, connect the
player and the component through the
ANALOG 2CH OUT L/R jacks.
Use an audio connecting cord for this
connection. Be sure to match the color-coded
pin to the appropriate jacks: white (left) to white
and red (right) to red.
Audio connecting cord (supplied)
Getting Started
Inserting batteries into
the remote
Hooking Up the Audio
Components
White (L)
Red (R)
DIGITAL(CD) ANALOG
5.1CH OUT 2CH OUT
OUT
SURROND
L
L
R
R
FRONT CENTER
COAXIAL OPTICAL
SUB
WOOFER
To CD (Super Audio CD) or line input jacks
(L/R) on a stereo amplifier, MD deck, etc.