Sony RHCIL - Manual (Page 4)

4
Features
The RHCIL (hereafter “the unit”) is an IEEE 1394a-2000 interface adaptor for the
Portable HardDisk Media. By connecting the unit, you can easily use the Portable
HardDisk Media as an external storage device. The unit is an IEEE 1394 device, so it is
possible to use it with the Windows or Macintosh default device driver (Plug and Play).
Because IEEE 1394a is SPB-2-compliant, you can achieve a maximum 400 Mbps data
transfer rate with the unit. Also, the Portable HardDisk Media is FAT32-formatted, which
means that you can easily share Windows and Macintosh data.
Package Contents
When you open the package, make sure that it contains the following. If any of the items
listed below are missing or damaged, call the Sony Customer Information Center.
• IEEE 1394 Interface Adaptor
• Portable HardDisk Media (included
only with the RHK80IL. Sold separately
and necessary to use the RHCIL)
• IEEE 1394 cable (2) (6-pin to 6-pin,
6-pin to 4-pin)
• Stand (included only with the
RHK80IL)
• AC adaptor
• Power cord
• Operating instructions (this document)
• Label (included only with the
RHK80IL)
Connection
Connecting the Portable HardDisk Media
Before connecting the Portable HardDisk Media,
remove the protective cover from the Portable
HardDisk Media connector.
Align the unit and Portable HardDisk Media so that
the connectors mate correctly. Connect the Portable
HardDisk Media to the unit, then secure with the screw
at the back of the unit.