Specifications, Audio power specifications, General – Sony RDP-XA700iP User Manual

Page 27

Advertising
background image

23

GB

Specifications

AUDIO POWER
SPECIFICATIONS

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:

Power Output (reference)

15 W + 15 W + 30 W (at no more than 10 %

harmonic distortion)

Section for iPod

DC out: 5 V
MAX: 2.1 A

Section for Wireless LAN

Compatible standards

IEEE 802.11 b/g
(WEP 64 bit, WEP 128 bit,

WPA/WPA2-PSK (AES),
WPA/WPA2-PSK (TKIP))

Radio frequency

2.412 GHz – 2.472 GHz
(2.4 GHz ISM Band, 13 Channels)
Channel 1 – Channel 13

General

Speakers

Satellite 4.8 cm dia. 8

Ω

Subwoofer 9.0 cm dia. 4

Ω

AUDIO IN

ANALOG

φ 3.5 mm stereo mini jack

Network port

10BASE-T/100BASE-TX (Auto Polarity)

Power requirements

DC IN 19.5 V

Dimensions (w/h/d) (including
projecting parts and controls)

Approx. 401 mm × 176 mm × 160 mm

Mass

Approx. 3.4 kg

Supplied accessories:

Remote control (1)
AC adaptor (1)
AC power cord (2)*
Operating Instructions (this document) (3)
AirPlay via Wi-Fi Network Setup (2)
CR2025 lithium battery (1) (Pre-installed in the

remote control for trial use)

Warranty card (1)
* For customers in the UK, Ireland, Malta,

and Cyprus:
Use the AC power cord (A).
For safety reasons, the AC power cord (B) is
not intended for the above countries/regions
and shall therefore not be used there.
For customers in other countries/regions:
Use the AC power cord (B).

Design and specifications are subject to
change without notice.

(A)

(B)

Advertising