Sony DEV-5 - Manual (Page 33)


Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Items you can control with the
MANUAL dial
Movie recording
[3D Depth Adjustment]
[Focus] ... p. 57
[Exposure] ... p. 57
[AE Shift] ... p. 58
[White Balance Shift] ... p. 58
Photo recording
[Focus] ... p. 57
[Exposure] ... p. 57
[IRIS] ... p. 58
[Shutter Speed] ... p. 58
[AE Shift] ... p. 58
[White Balance Shift] ... p. 58
To assign the menu item to the
MANUAL dial
 Press and hold MANUAL down for a
few seconds.
The [Dial Setting] screen appears.
 Rotate the MANUAL dial and select the
item to be assigned.
 Press MANUAL.
Notes
Manual settings will be retained even if you
change the assigned item of the MANUAL dial.
However, if you set [Exposure] after setting
[AE Shift] manually, [Exposure] will override
[AE Shift].
If you set either one of [Exposure], [IRIS], or
[Shutter Speed], the settings of other 2 items
are canceled.
If you select [RESET] in step , all the items
adjusted manually are reset to the default
settings.















Tips
If you select at the right of the screen while
setting [3D Depth Adjustment], the manual
setting of [3D Depth Adjustment] is canceled.
In the case of items other than [3D Depth
Adjustment], pressing MANUAL switches
between automatic and manual settings.
You can also assign menu items to the
MANUAL dial by selecting (MENU) 
[Camera/Mic]  [ ( Camera Settings)]
 [Dial Setting].
Even if you open the IRIS wider (a smaller
F-stop) than F3.4 when you set the zoom lever
to the W (Wide angle) side, the IRIS is reset
to F3.4 as you move the zoom lever to the T
(Telephoto) side.
If you adjust the IRIS, the in-focus range in
front of and behind the focused subject is
changed. When you open the IRIS wider (a
smaller F-stop), the in-focus range becomes
narrower, and when you close the IRIS
narrower (a larger F-stop), the in-focus range
becomes wider. You can set the IRIS to a
preferred value depending on the shooting
scenes.
When you record images under a fluorescent
lamp, sodium lamp, or mercury lamp,
horizontal stripes may appear, flicker may
occur, or color may change. In this case, change
the shutter speed according to the power supply
frequency in your region.
The camera data (p. 66) that appears on the
screen will differ, depending on the recording
settings of this product. The settings will be
displayed with the following icons.
: Automatic
: Exposure is set manually.









