Sony DEV-5 - Manual (Page 61)

1
Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Tips
You can change the setting only in the 2D
mode.
[Digital Zoom] is fixed to [On] while recording
photos.
Auto Back Light
This product adjusts the exposure for
backlit subjects automatically.
 On
Adjusts the exposure for backlit subjects
automatically.
Off
Does not adjust the exposure for backlit
subjects.
Dial Setting
You can select an item you want to set to
the MANUAL dial. For details, see page 32.
Face Detection
You can set this product to detect a face
automatically.
It adjusts the focus/color/exposure
automatically for the face of the subject.
Auto
Detects faces without distinction between
adults and children.
Child Priority( )
Gives faces of children priority.
Adult Priority( )
Gives faces of adults priority.
 Off ( )
Does not detect faces.
Notes
The frame does not appear on faces, even when
this product detects the faces.





Faces may not be detected depending on
recording conditions, subject conditions, and
the setting of this product.
[Face Detection] may not function properly
depending on recording conditions. Set [Face
Detection] to [Off] in this case.
Tips
For better face detection performance, shoot the
subject(s) under the following conditions:
Shoot in a sufficiently bright place
The subject(s) does not wear glasses, a hat
or mask
The subject(s) faces directly towards this
product
Wind Noise Reduct.
You can record a movie with less wind
noise by cutting the low-frequency sound
input from the built-in microphone.
 Off
Disables wind noise reduction.
On ( )
Enables wind noise reduction.
Micref Level
(Microphone
reference level)
You can select the microphone level for
recording sound.
 Normal
Records ambient sounds, converting them
into the appropriate level.
Low ( )
Records ambient sound faithfully. Select
[Low] when you want to record an exciting
and powerful sound in a concert hall, etc.
(This setting is not suitable for recording
conversations.)






