Shooting photos, Press mode to turn on the (photo) lamp – Sony DEV-5 User Manual

Page 23

Advertising
background image



Table of C

on

ten

ts

M

enu Lists

Inde
x

GB

The following states will be indicated if data is

still being written onto the memory card after

recording has finished. During this time, do

not apply shock or vibration to this product, or

remove the battery or AC Adaptor.

Access lamp (p. 19) is lit or flashing

The media icon in the upper right of the

screen is flashing

Tips

See page 82 on the recordable time of movies.

You can check the recordable time, estimated

remaining capacity, etc., by selecting

(MENU)  [Setup]  [ (

Media

Settings)]  [Media Info].

To switch the 2D and 3D recording

mode

You can select a recording mode of either

2D or 3D.

To switch 2D and 3D, select

(MENU)

 [Image Quality/Size]  [2D/3D Mode

Select].

Tips

When you change the [2D/3D Mode Select]

setting, movies played back on this product and

movies output from the HDMI OUT jack are

changed between 2D and 3D automatically.

Optimum distance from the subject

and zooming level

The distance at which you can obtain

good 3D movies varies depending on the

zooming level.

Distance from the subject

Zoom

about 80 cm to 6 m (3 ft. to

20 ft.)
about 2.5 m to 10 m (8 ft. to

32 ft.)
about 7.5 m to 20 m (25 ft. to

65 ft.)



Notes

When you record 3D movies, the binocular

magnification can be set to up to about 5 times.

If you want to monitor

*

or record a subject

using a larger image, set [2D/3D Mode Select]

to [2D].

*

In this manual, ”monitor” means that the user

watches or views a subject without recording.

Data code during recording

The recording date, time, condition and

coordinates (DEV-5/5K) are recorded

automatically on the memory card. They

are not displayed during recording.

However, you can check them as [Data

Code] during playback. To display them,

select

(MENU)  [Setup]  [

(

Playback Settings)]  [Data Code]

 a desired setting 

.

Shooting photos

Press MODE to turn on the

(Photo) lamp.

The screen display switches for photo
recording mode.

(Movie): When recording a movie

(Photo): When recording a photo

MODE button

Advertising
This manual is related to the following products: