Sony DEV-5 - Manual (Page 26)


Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Playing images on a TV
Connection methods, the image type
(3D or 2D) and the image quality (high
definition or standard definition) viewed
on the TV screen differ depending on
what type of TV is connected, and the
connectors used.
Output connectors on this product
1
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the TV.
2
Connect this product to a TV.
Use the supplied AC Adaptor as the power
source (p. 14).
3
Play a movie or a photo on this
product (p. 24).


List of connection
Connecting to a 3D TV
Movies recorded in 3D are played back in
3D. Make sure that [2D/3D Mode Select] is
set to [3D].
Notes
When the TV is connected with a component
A/V cable, 3D movies are displayed in 2D.
Adjusting the depth of 3D movies
when this product is connected to a 3D
TV with an HDMI cable (sold separately)
You can adjust the depth of image while
playing back 3D movies.
Only operating buttons are displayed in the
viewfinder. Adjust the depth while checking
the images displayed on the TV screen.
 Select  [3D Depth Adjustment] on
the 3D movie playback screen.
The movie stops, and a warning about
[3D Depth Adjustment] appears.


(Green) Y
(Blue)P
B
/C
B
(Red)P
R
/C
R
(White)
(Red)
Component A/V Cable
(supplied with DEV-5K)
HDMI Cable (sold
separately)
HDMI OUT jack
A/V Remote Connector