Sony NW-MS90D - Manual (Page 36)

36
3
Press the Play/Stop button to confirm.
“MAN” blinks.
4
Rotate the Shuttle switch to select
“SET >.”
V O L : S E T >
5
Press the Play/Stop button to confirm.
“VOL LO xx”* blinks.
* “xx” stands for numeric values of the
volume level.
V O L L O x x
6
Set volume levels of three preset levels:
LO, MID, or HI.
1 Rotate the VOL (+/–) control to set the
volume level of the LO preset.
2 Rotate the Shuttle switch to select “VOL
MID xx,” and then rotate the VOL (+/–)
control to set the volume level of the
MID preset.
3 Rotate the Shuttle switch to select “VOL
HI xx,” and then rotate the VOL (+/–)
control to set the volume level of the HI
preset.
7
Press the Play/Stop button to confirm.
8
Press the MENU button.
The display returns to the normal screen.
With these settings, you can adjust the
volume level to any of three preset levels:
LO, MID, or HI.
To cancel the menu mode
Select [RETURN] in the menu screen or press the MENU
button.
Note
If AVLS (page 35) is set, the actual volume may be lower
than the settings.
Switching to the manual
mode
1
Press the MENU button.
The menu screen is displayed.
2
Rotate the Shuttle switch to select
“VOL: SET.”
V O L : S E T >
3
Press the Play/Stop button to confirm.
“SET >” blinks.
4
Rotate the Shuttle switch to select
“MAN.”
V O L : M A N
5
Press the Play/Stop button to confirm.
6
Press the MENU button.
The display returns to the normal screen.
With this setting, you can adjust the volume
level by rotating the volume control.
Setting the volume using the
preset volume function (continued)