Sony NW-MS90D - Manual (Page 40)

40
3
Select the desired track or group which
you want to edit.
When editing the track name
Rotate the Shuttle switch to select the
desired track name, and press the Play/Stop
button to confirm.
When editing the group name
Pull out the Shuttle switch to display the
group name, and then rotate it to select the
desired group name, and press the Play/
Stop button to confirm.
When the track/group name is selected, the
first character/number/symbol flashes, and
you can start editing.
G 0 0 1 T 0 0 1
4
Edit the track/group title.
1 If you selected a group in step 3, push in
the Shuttle switch.
2 Rotate the Shuttle switch to select the
desired character/number/symbol, and
push the Play/Stop button.
The selected character/number/symbol is
confirmed and the next character flashes.
T 0 0 1 T 0 0 1
z Tip
You can change the character/number/symbol
type by rotating and holding the Shuttle switch.
Release the Shuttle switch at the desired type.
Rotate to select your desired character/number/
symbol.
3 After editing the title by repeating the
step 2, press and hold the Play/Stop
button for a few seconds to confirm.
The edited title is stored.
T R C K 1 T 0 0 1
Editing the track name and group
name (EDIT NAME) (continued)
To
Move the cursor
Insert a blank
space before the
cursor
Erase a character
above the cursor
Operation
Pull and rotate the Shuttle switch
Select the last symbol
Press the SOUND/AVLS button
5
Press the MENU button.
The display returns to the normal screen.
Other editing operations are as follows:
To cancel the menu mode
Select [RETURN] in the menu screen or press the MENU
button.
To cancel editing
Press the MENU button.
Notes
• You can edit only the track/group names contained in
audio data recorded using the recording USB cradle. If
you select audio data transferred with the SonicStage
software in your computer, “CANNOT EDIT” appears,
and you cannot edit. Even if you record audio data
using the recording USB cradle, you cannot edit the
group/track names on your Network Walkman if they
have already been edited using SonicStage software.
• The character type which you can input are alphabetical
letters (A-Z, a-z), numbers (0-9) and symbols (” ( ) , _ ‘
- blank space).
• The maximum number of characters that you can input
is 20.