Sony STR-DN840 - Manual (Page 39)

39 US
Prep
ari
n
g
th
e
Recei
ver
(Depending on the network
environment, the network settings may
take some time.)
3 Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 57).
When checking the network settings, see
“Information” (page 95).
Setting up a wireless
network using the WPS PIN
code method
If the access point supports the WPS PIN
(Personal Identification Number) code
connection, you can set up a WPS wireless
connection by entering the receiver’s PIN
code into the wireless LAN router/access
point.
1 Select “Manual Registration” in step
2 in “Searching for an access point
and setting up a wireless network
(Access Point Scan method)”
(page 37).
2 Press V/v repeatedly to select “WPS
PIN”, then press .
The available SSID (access point) list
appears.
3 Press V/v repeatedly to select the
network name (SSID) you want, then
press
.
The PIN code (8 digits) of the receiver
appears on the TV screen. Leave the PIN
code displayed until the connection is
complete. (A different PIN code is
displayed each time you perform this
operation.)
4 Input the receiver’s PIN code into the
wireless LAN router/access point.
The receiver starts the network settings.
“Completed” appears after the network
settings are complete and
“ ” lights
up on the display panel. To return to the
Network Settings menu, press
.
(Depending on the network
environment, the network settings may
take some time.)
5 Perform the server settings.
To listen to audio content stored on the
server, you need to set up your server
(page 57).
• When checking the network settings, see
“Information” (page 95).
• For details on entering the PIN code into the
wireless LAN router/access point, refer to the
operating instructions of the wireless LAN
router/access point.
If you cannot find the
network name (SSID) you
want (manual setup
method)
You can input the network name (SSID)
you want manually if it does not appear on
the list.
1 Select “Manual Registration” in step
2 in “Searching for an access point
and setting up a wireless network
(Access Point Scan method)”
(page 37).
2 Press V/v repeatedly to select
“Direct Input”, then press .
3 Enter the network name (SSID), then
press
.
4 Press V/v repeatedly to select the
security setting you want, then press
.
5 Follow steps 4 to 7 in “Searching for
an access point and setting up a
wireless network (Access Point Scan
method)” (page 37).
Tip Tips