Sony STR-DN840 - Manual (Page 40)

40 US
Guide to on-screen
display (OSD) operation
You can display the menu of the receiver
on the TV screen and select the function
you want to use on the TV screen by
pressing
V/v/B/b and on the remote
control.
When you start operating the receiver,
make sure to press AMP on the remote
control first. Otherwise, operations that
follow may not be aimed at the receiver.
1
Switch the input of the TV so that
an image of the menu is displayed.
2
Press HOME.
The home menu is displayed on the TV
screen.
Depending on the TV, the home menu
may take some time to appear on the
TV screen.
3
Press V/v repeatedly to select a
menu you want, then press to
enter the menu.
The menu item list appears on the TV
screen.
Example: When you select “Watch”.
4
Press V/v repeatedly to select the
menu item you want to adjust, then
press
to enter the menu item.
5
Repeat steps 3 and 4 to select the
parameter you want.
When “OPTIONS” appears in the lower right
portion of the OSD, you can display the function
list by pressing OPTIONS and selecting a related
function.
To return to the previous
screen
Press RETURN O.
To exit the menu
Press HOME to display the home menu,
then press HOME again.
Using the menu
OPTIONS
RETURN
O
HOME
V/v/B/b,
AMP
Tip